On a local network, it is not difficult to connect to a distant PC – type IP address or its name into the Remote Desktop Connection box. However , when you are attempting to connect to your distant PC through the world wide web, things get slightly more complex.
Make sure that the Windows firewall is not blocking Remote Desktop. It’s possible for you to always check this by choosing Enable programs to speak through Windows Firewall and opening up the Windows Firewall section of the Control Panel. Scroll down and make certain that there is a tick next to Remote Desktop.
Next, you will have to make a couple of settings changes to the router where the PC to which you want to connect is found. This will even provide you with the IP address of the PC you must connect to.

You must be aware of the outside IP address of the PC to be obtained. To get this done, open up an internet browser on such PC and browse to a service like myip.dk. This can let you know the address you should type into the Remote Desktop Connection dialog box if you want to connect to your Computer through the web. Oftentimes, this outside IP address is subject to improve.
This may provide you with a memorable domain name to which you certainly will keep track of any changes to your outside IP address, and can connect. Many routers have built in support for dynamic DNS, so take a look in your guide and choose one of the services.
You ought to currently have the ability to connect from your local network both to your Personal Computer and through the world wide web.